#bambulabs #x1c #3DPrint The Bambu X1C's ability to load a different filament after it runs out is the best I've seen. It's pretty much flawless. Had an overnight print, ran out of the same color and didn't care. Loaded the filament and it picked up right where it left off and just "worked"

Ein neuer #Lampenschirm für die #Lampe über dem Esstisch. Der alte von Ikea war nun wirklich mal in die Jahre gekommen.

Ganz einfach aus weißem PLA gedruckt, was natürlich impliziert, dass ihr da keine 100 W Glühbirnen reinschraubt, sondern ne #E27 #Energiesparlampe
Gute Haftung und ein korrekt eingestellter Drucker sind notwendig bei der dünnen Konstruktion.

https://makerworld.com/de/models/883846-water-lily-lamp-shade-100-3d-printable#profileId-838520

In for a penny, in for a pound (dollar).

This is a real perfect first layer (on my Bambu Lab X1C, except the right back corner. Here you can see a... wavy surface structure, and I don't know what the reason could be.

Do you have any ideas?

Okay Peeps… I'm bored. Should I jailbrake my #X1C and install #X1Plus?

Bummer! It seems that #BigTreeTech is currently working on a replacement board for #BambuLab #X1C printers (running Klipper), to fix that dreadful firmware desaster.

That's really interesting. At the moment two printers are doing their job. Since the #X1C does higher temperatures than the #P1S, the X1C needs less power than the P1S.

Wow! 3 specific parts of my #NeXT #MegaPixel display take almost 18 hours to print on the #BambuLab #X1C. On a resin printer (Saturn 4 Ultra), #Chitubox tells me it takes 3:43h. And that's with significantly better print quality.

Wow!

I did not realize using a 0.2 nozzle would increase printing time by so much. I'm running a #Benchy print and it's going to take 2 hours

Ich bin neu beim #3DDruck, mein Drucker #BambuLab #X1C ist heute angekommen. Beim Zusammenbau habe ich versehentlich einen falschen Filamentschlauch hinten eingesteckt. Wie bekommt man den wieder heraus? Einfach ziehen geht nicht.

Had to share this as it was sooo much fun and one of those few projects that works first time!!

This is the 150% scale version of Dummy 13 : https://makerworld.com/en/models/638587#profileId-564186

Oh, the first life stream of my #BambuLab #X1C. Do you get a smooth stream?

https://www.youtube.com/live/VXcGjBPaldQ

Timelapse video of an overnight full plate 3D print. I don't often do full build plate prints like this so it was fun to see and I'm glad it was successful after a 21-hour print time! This timelapse makes it look like the print head doesn't move much and the prints just magically appear from thin air... The print is components for a filament spool winder. #3dprint #timelapse #video #BambuLab #X1C

Is there anyone here who has both a #BambuLab #X1C AND a #P1S?

I have noticed that the housings differ slightly in width and depth, where they should be the same size. Specifically, it concerns the recess at the top where the glass plate is inserted. The internal dimensions of my P1S are about 1.5 mm larger than those of the X1C.

Can anyone confirm this?

Please share, thank you.

Forgot to post this Thanksgiving photo of me having a pleasant time with my family.

After printing some switch caps for the #Imsai-8080 clone, I give the mouse cover a try. The electronic was included as a goodie, the case for self print.
#BambuLab #X1C

Ersten Druck mit über 8h im neuen #x1c angestoßen.

Ich hab Zuversicht in die Qualität und bin begeistert über die Geschwindigkeit , bin aber gleichzeitig über den "Cloud Zwang" für alle Funktionen enttäuscht.

Und bevor jemand kommt mit "LAN-only Mode": Die Funktionen sind beschnitten. Und wer mir erzählen will, das ich für das aktivieren der Druckraumbeleuchtung die Cloud brauche .

Self printing of my "Wireless Mouse Components Kit-002". I'm absolutly impressed by the speed and the precision of my new 3D printer. I bought it on the recommendation of my son, who has been using it in the company for almost a year mostly every single day.
#BambuLab #X1C

Pour fêter les 80 ans de ma tante, le week-end prochain, le dress code sera... jaune! Quoi de mieux que des broches imprimées en 3D comme accessoire vestimentaire? Impression en deux parties assemblées.
Modèle: https://www.printables.com/model/152220-sunflower-standwithukraine
Imprimante: Bambulab X1C
Filaments: PLA+ Ariane Plast Jaune Sécurité et PLA PM Filament Blue Pearl
Buse: 0,4 mm
Hauteur de couche: 0,16 mm
Plateau: PEI texturé
Durée d'impression: 1h07
#impression3d #3dprint #x1c

Impression de trois Leviators (un pour ma collection perso, un pour le petit voisin, et un à distribuer à l'occasion). J'ai utilisé le modèle 5 couleurs.
Modèle: https://makerworld.com/fr/models/193723#profileId-214134
Imprimante: Bambulab X1C
Filaments: PLA+ Ariane Plast Bleu turquoise, Noir, Blanc, Rouge et Jaune Sécurité.
Buse: 0,4 mm
Hauteur de couche: 0,20 mm
Plateau: PEI texturé
Durée d'impression: 13h40min pour trois Leviators
#impression3d #3dprint #pokemon #leviator #gyarados #x1c #ams