Я ещё хотел лицензию пилота самолета получить. Но, видимо, не скоро...
#welding
#аврора

What's that, #Welding fume is being classified as a higher level carcinogen, and so I not only need a #PAPR respirator welding helmet, I need Local Exhaust Ventilation to suck up and filter the welding fume in the atmosphere?

OK, and how much is that machine.

~$7500 for one that doesn't use ($500+) consumable filters. *sigh* so that's THIS years's tax item.

Salut Qlub,

J'espère que vous allez bien !

Voici l'abeille à qui appartient les ailes ! Il me reste à peaufiner la peinture du corps. Il s'agit d'une sculpture de jardin. Je la vois voler tranquillement au milieu d'un bosquet fleuri.

J'ai hâte de la mettre dans un vrai bosquet pour voir!

100% rebut

Je vous souhaite un très bon mardi amis Qlub! N'oubliez pas de rire ajd!

Africa: Ethiopia's Official Highlights Critical Need for Skilled Welding Workforce to Drive Africa's Prosperity: [ENA] Emphasizing that national wealth is intrinsically linked to the skills of its people, Ethiopia's Minister of Water and Energy, Habtamu Itefa, today underscored the urgent need to bridge the skills gap across Africa. http://newsfeed.facilit8.network/TK92Yr #Ethiopia #SkilledWorkforce #Welding #AfricaProsperity #SkillsGap

Did I say the Chinese were innovating?

https://vm.tiktok.com/ZNdN7SmjK/
#welding #diy #laser

My (lack of) #welding prowess in one photo

Bon lundi Qlub,

J'espère que vous allez bien !

J'ai fini le petit corps de ma bête réfractaire. Je le voulais concentré juste avant de donner un coup de patte. Je le voulais dans une scène de son quotidien.

Je crois bien que je vais peindre l'intérieur en noir. Ça ne changera pas grand chose sur le look.

Dans ma bulle ! Il ne nomme.

Metal neuf et recyclé.

Passez une bonne journée, c'est un ordre

Found some pictures of the fixed thumb for this machine from another seller. The importer we bought it from doesn't bother with the fixed thumb and only has a €300 hydraulic thumb, which isn't in stock until autumn anyways.

Doesn't look complicated, need to dig through my steel treasure pile and see if I can find enough heavy plate to make one.

Our machine already has the mountings on the boom, although only one hole instead of three.

Set up a new #Welding trolley for my #TIG / #PlasmaCutter unit. It's really difficult in Australia to find low-profile welding trolleys that handle a heavy machine (20+KG), AND have a long shelf for the unit itself. That's compounded by a design quirk on mine - the shield gas inlet is dead centre, which means the fittings align with the closest point of the gas bottle. The solution - #DIY standoffs for the bottle's cradle (until I can make something more engineered). Soon, more #Art #Sculpture.

Amazing high speed welding, plasma- and laser cutting videography by "Applied Science" using a specialised Krontech camera.

https://www.krontech.ca/product/helios/

https://www.youtube.com/watch?v=wSUxK8q4D0Q

Bon lundi Qlub!

J'espère qu'il fera beau dans votre tête

Souvent on me demande si je fais fondre l'acier pour le modeler. On me demande aussi si j'utilise des moules. La réponse aux 2 questions est non. Je plie le métal à froid (masse et enclume) et je monte mes structures à partir d'un mauvais dessin 2D, dans les airs.

J'oublie de prendre des photos mais j'avais documenté ma Férale.

Bonne journée à toutes et tous! Dernier jour de mars ️

Looking into welding a hollow steel d20 dice aka icosahedron.

There are three factors that are dependent on the final result:

- thickness of the steel sheet metal,
- length of the equilateral triangle, and
- diameter as twice the circumradius.

Looked at sheet metal thickness of 2-5 mm and triangle length of 75-200 mm where the end resulting weight is 0.78-13.9 kg without the reduction/addition of welding and using steel density of 0.008 g/mm^3. The diameter respected to the triangle length is 143-380 mm.

Oh no, my 1970s #foldingbike seems to turn into a brake-in-half-bike soon.

Any recommondations? Just clean the area and MIG #weld it? Add some reinforcement?

Satisfaction du jour
#welding #WeldingArt #upcycling #UpcyclingArt

I went to Sant'Arcangelo to vandalise Mutonia #mutonia #art #metal #welding #weldingtipsandtricksl

lo-fi acid beats to don't and ballast to

https://youtube.com/watch?v=jk7IVyhBhFg — Thermite welding process for joiningrailway tracks #indian #railway #welding (1:00)

Made this today.